VKCD-1311SM/VF

Specifications:
Video standard		PAL
System		Colour
Sensor size		1/3"
Imager		CCD, Sony Super HAD Interline Transfer CCD
Active picture elements		approx. 440,000, 752(H) x 582(V)
Synchronization		Internal
Signal-to-noise ratio		48dB
Sensitivity (at 50% video signal)		0,3Lux, at F1.2 (VT measurement result including bubble)
Rotation range		manual: 360°
Automatic gain control (AGC)		On/Off switchable
Gamma correction		approx. 0.45
Automatic shutter (AES)		1/50 ~ 1/100.000sec. (not available during Auto Iris ON)
Integration rate		no
Flickerless function		On/Off switchable
White balance (AWB)		Automatic control
Backlight compensation		BLC, On/Off switchable
Aperture Correction (APC)		Horizontal and vertical
IR cut filter		no
Video outputs (type)		CVBS
Video outputs		1Vp-p, CVBS, 75ohms
Lens mount		integrated lens
Lens type		varifocal
Lens		F1,5 ~ 340/4 ~ 9mm with galvanometer driven iris
Application range		security
Nominal format size		1/3"
Aspherical technology		yes
Focal length		4-9mm
Horizontal angle of view		71-31,6°
Focus range		0.5m ~ ?
Iris control		DC
Mount		n/a
Cable connection		Video (BNC), 12VDC (DC jack)
Serial interfaces		no
Temperature range (Operation)		-10° ~ +50°C
Heater		no
Protection rating		IP65, at installation according to the manual
Supply voltage		12VDC, (9 ~ 15VDC), 12VDC ±0,5V recommended
Power consumption		3.0watts max.
Vandalism resistant		yes
Bubble		100mm diameter, Vandal resistant 3mm -tinted- polycarbonate with high resistance
Colour (bubble)		tinted
Camera adjustment		3-axis camera adjustment: 360° horizontal rotation / +-45° tilt rotation, 360° pan rotation
Camera fixing		no
Mounting		surface mount, wall mount
Housing		indoor housing, Die-cast aluminium with tinted polycarbonate bubble
Housing material		aluminium
Colour (housing)		Pantone Cool Gray 1C
Dimensions (HxWxD)		See drawing
Weight		840g
Parts supplied		Mounting screw kit, Torx wrench key, Service monitor cable (Cinch plug), Guide pattern, Manual